Rockwell Automation 2711 PANELBUILDER SOFTWARE USER MANUAL - Manual (Page 285)

The Objects
Chapter 10
10-20
Choose Assign Screen to State. Type in the number of the state you want to
assign. The first screen in the list is State 0, the second is state 1, etc. Press
Enter. A small window—the Assign Screen to State n window—will open.
Type in the number of the screen that you want to go to when State n is
chosen from the list. Repeat for each screen (state) on the list.
Use the Edit Text and Move Text items to create the list of screen names.
The list is strictly for your information. The movement between screens is
determined by the screen numbers you have defined for the states.
Use Border to select a border type for your list. If you include a border,
you will lose two single size or one double size entry (state).
Keypad Screen Selectors (Small and Large)
(Touch Screen Terminals Only)
These two objects appear as numeric keypads overlaying the current
screen. They allow an operator to choose the next screen to be displayed by
entering its number.
The screen selector keypads differ only in size: the large keypad is 48
characters wide, while the small keypad is 24 characters wide. Both
keypads are 24 lines high, and both operate in the same way.