Rockwell Automation 2711 PANELBUILDER SOFTWARE USER MANUAL - Manual (Page 261)

PLC Controlled Options
Chapter 9
9-4
Table 9.A
Time and Date to PLC Controller Format
ББББББ
ББББББ
Word
ББББ
ББББ
1
БББББББББББББ
БББББББББББББ
Year (last 2 digits)
ББББББ
ББББББ
Word
ББББ
ББББ
2
БББББББББББББ
БББББББББББББ
Day of week (1 = Sunday)
ББББББ
ББББББ
Word
ББББ
ББББ
3
БББББББББББББ
БББББББББББББ
Month
ББББББ
ББББББ
Word
ББББ
ББББ
4
БББББББББББББ
БББББББББББББ
Day of month
Б ББББ Б
Word
Б ББ Б
5
Б БББББББББББ Б
Hours in 24Ćhour (military) format
ББББББ
Б ББББ Б
Word ББББ
Б ББ Б
6 БББББББББББББ
Б БББББББББББ Б
Minutes
ББББББ
ББББББ
Word ББББ
ББББ
7 БББББББББББББ
БББББББББББББ
Seconds
Start Word can be any block transfer PLC input address. If discrete,
start word must be 0 or 1
Data Type is BCD.
Enable this option to transfer the current screen number to the PLC
controller. This is useful for multiplexing display data from PLC output
addresses based on screen number. For more information on multiplexing,
see Chapter 4, Planning Your Application.
Choose Current Screen Number to PLC Controller from the Options menu.
Then enter a PLC input address. Be sure your address assignment is long
enough to accommodate the longest screen number—including the screen
numbers of the Alarm History Screen and Alarm Status Screen.
Data Type can be Binary or BCD.
Screen print requests are ignored when the printer is already busy with a
screen print. The Screen Print Active option allows the PanelView terminal
to inform the PLC controller that a screen print is in progress.
Choose Enabled from the pop-up list to open the address definition
window and assign a PLC input address.
This option allows the PLC controller to sound the terminal’s built-in
beeper (audio indicator).
To use this feature, first select PLC Controlled Audio and choose Enabled.
Then define a PLC output address in the address definition window. If a
PLC output address bit is assigned and this function is enabled, then, when
the bit is set to 1, the beeper sounds. When the bit is set to 0, the beeper
stops.
Current Screen Number to PLC
Controller
Screen Print Active to PLC
Controller
PLC Controlled Audio