Rockwell Automation 2711 PANELBUILDER SOFTWARE USER MANUAL User Manual
Page 161
Creating a Sample Application File
Chapter 5
5-47
c.
Choose Rack and then 1.
d.
Choose Start Word and type 0.
e.
Choose Start Bit and type 12.
f.
Choose Number of bits and type 4.
g.
Choose Top Position Value and choose ALL BITS OFF.
h.
Choose Update Address. The current address will be displayed
on the top line of the Button Control Address window.
12.
Choose Quit to close the Selector Control Address menu.
13.
Choose Quit to close the Address menu.
14.
Open the Exit menu. Choose Exit and Save Object.
15.
Choose Quit or press Esc to close the Control Selectors menu and
return to the Add menu.
Add the Multi-State Indicators
The five Multi-State Indicators allow the operator to see the current state
for each of the pumps listed in the Control List Selector.
1.
To define the first Multi-State Indicator, choose Indicators from the
Add menu; then choose Multi-State from the Indicators menu.