Rockwell Automation 2711 PANELBUILDER SOFTWARE USER MANUAL - Manual (Page 155)

Creating a Sample Application File
Chapter 5
5-41
6. Save this screen by choosing Exit from the Screen menu and then
choosing Exit and Save Screen.
You will be returned to the Screens menu. At this point, the Screens menu
should be open and the Select Screen option should be highlighted.
Screen 3: PUMP CONTROLS
1. To create the third screen, choose Create New Screen. The cursor
moves to the next field where you enter the screen’s number.
2. Press Enter to accept the suggested screen number and type the name
for the screen, PUMP.
Figure 5.57
The Screens Menu
20090
FILE MENU: Screens Windows Options Communications Exit
FILE MENU Screens Windows Options Communications Exit
Screens
Select Screen 1 MAIN SCREEN
Create New Screen 3 PUMP
Utilities
Powerup Screen 255 Alarm History
Application File Comment
Quit
You’ve just created the third screen. Its name is in the status line at the
bottom of the screen, with the Screen menu across the top. The next step is
to start adding the objects.
If you refer back to Chapter 4 ( Figure 4.13 ), you’ll see that Screen 3
consists of:
three Background Text objects
one five-position Control List Selector
five Multi-State Indicators
five Numeric Data Displays
one Box