Rockwell Automation 2711 PANELBUILDER SOFTWARE USER MANUAL - Manual (Page 65)

Using PanelBuilder
Chapter 3
3-29
2. Type in the function key number that corresponds to the button you
are configuring, and then press Enter.
If you enter 0, no key is assigned.
Look
The options in the Look menu define the appearance of an object.
Border Most objects allow you to define a rectangular border around
the object. To define a border:
1. Choose Border from the Look menu.
2. Choose the desired type of border. Your options are:
Single
Double
None
Dotted
Outer
Solid (the width of a character cell)
Foreground Color provides a choice of color for the lines and borders
of the object. For color PanelView terminals you can assign both a
foreground and background color to each object.
Background Color allows you to assign a background color to each
object created for color PanelView terminals.
IMPORTANT: You cannot use the same color for both foreground and
background.
High Intensity provides a choice of normal or high intensity display for
objects created for monochrome PanelView terminals.
Reverse Video provides a choice of normal or reverse video display
(i.e., black on an amber background) for objects created for
monochrome PanelView terminals.
Blink causes the object to flash on the PanelView terminal screen.
Underline underlines the display text on the screen on the PanelView
terminal screen.
Character Height sets the object’s text as single or double height.
Character Width sets the object’s text as single or double width.