Rockwell Automation 2711 PANELBUILDER SOFTWARE USER MANUAL - Manual (Page 145)

Creating a Sample Application File
Chapter 5
5-31
6. A copy of the push button is placed on the screen, but at first it can’t
be seen since it’s directly on top of the original one. To see the new
button, you have to move it aside.
Choose Move & Size and then Move.
Figure 5.44
The Move and Size Menu
20077
OBJECT MENU: Move & Size Look States & Text Address Utility Exit
OBJECT MENU: Move & Size Look States & Text Address Utility Exit Move & Size
Move
Size
Function Key 0
Quit
7. Position the new button to the right of the previous one.
8. Choose Function Key and enter the appropriate function key number
(see
Table 5.B ).
9. Choose Quit or press Esc to close the menu.
Figure 5.45
States and Text Menu
20192
OBJECT MENU: Move & Size Look States & Text Screen Utility Exit
OBJECT MENU: Move & Size Look States & Text Screen Utility Exit States & Text
State 0
State 1
Display States
Outer Text
Quit
10. Choose States & Text from the Object menu.
11. Choose Outer Text.
12. Change the text above the button to match the plan in the worksheet
in Chapter 4 (see
Figure 4.10 ).