Rockwell Automation 2711 PANELBUILDER SOFTWARE USER MANUAL - Manual (Page 356)

The Objects
Chapter 10
10-91
If you set any Object List text string associated with the Multi-State
Indicator to Double, the Object List height will automatically be double.
For example, if you define the Character Height as Single in State 1 and
Double in State 2, the Object List height in State 1 changes to Double,
even though the Character Height remains Single. When you define
State 3, the Object List height will automatically be Double. In State 3
you can enter single height characters on every line of the Object List.
IMPORTANT: If you change the Character Height in State 2 to Single,
the size of the Object List remains Double, because States 3 has text
entered in the second line of the Object List. To change the Object List
height back to Single, you must remove the text from the second line of
text in State 3.
Address
The Address menu is present in all three Object List types. It lets you
define a Visible State Address for each object of the object list.
Visible State Address allows you to attach an address to each visible
object or “state” in the Object List.
To assign a Visible State Address to one of the visible objects or
“states”, enter the number of the state from the list you wish to define.
Define the address in the standard address menu that appears. The
following figure provides an example of how the Visible State Address
functions.