Rockwell Automation 2711 PANELBUILDER SOFTWARE USER MANUAL - Manual (Page 143)

Creating a Sample Application File
Chapter 5
5-29
To define the address:
1. Choose Communications and then Discrete.
2. Choose Input/Output. For the Indicator State Address, you have the
choice of selecting either an input or output address. Choose Output.
3. Choose Rack and then 1.
4. Choose Start Word and type 0.
5. Choose Start Bit and type 0.
6. Choose Update Address. You’ll see the current address displayed on
the top line of the Indicator State Address window. Choose Quit to
close the Indicator State Address and Address menus.
Open the Utility menu, and choose Name.
Figure 5.40
The Utility Menu
20074
OBJECT MENU: Move & Size Look States & Text Address Utility Exit
OBJECT MENU: Move & Size Look States & Text Address Utility Exit Utility
Name
Default
Quit
Type the name FRONT ON. The name identifies the object for
documentation purposes—it is printed at the bottom of the screen when
you select the object for editing, and it is included in the object’s listing in
printed reports.
When you’re finished, choose Quit, then Exit, then Exit and Save Object.
You are now at the Push Buttons menu.
The Remaining Momentary (Normally Open) Push Buttons
Use the Memorize and Recall functions to create the remaining four
Momentary (Normally Open) Push Buttons.
1. Close both the Push Buttons menu and the Add menu to go back to
the Screen menu.