Rockwell Automation 2711 PANELBUILDER SOFTWARE USER MANUAL - Manual (Page 165)

Creating a Sample Application File
Chapter 5
5-51
6. Choose Update Address. You’ll see the current address displayed on
the top line of the Indicator State Address menu.
7. Choose Quit to close the Indicator State Address window.
8. Choose Quit to close the Address menu.
9. Open the Exit menu and choose Exit and Save Object.
Create the Remaining Four Multi-State Indicators
1. Press Esc twice to close the Indicators and Add menus. You’ll return
to the Screen menu.
Figure 5.69
The Screen Menu
20100
SCREEN MENU: Add Edit Move Delete Memorize Recall Options Exit
2. Choose Memorize. Position the cursor over the existing Multi-State
Indicator and press Enter.
3. Choose Recall. A copy of the Multi-State Indicator is placed directly
on top of the existing Indicator. (You can’t see it since it’s exactly on
top of the existing one.)
4. Choose Move & Size from the Object menu and then choose Move.
Position the new indicator one row below the previous Indicator and
press Enter. The correct positions for the remaining four Multi-State
Indicators are:
Row 12, Column 36
Row 13, Column 36
Row 14, Column 36
Row 15, Column 36
5. Choose Address from the Object menu and define the address for
each Multi-State Indicator. The correct addresses are:
D O 1 0/13 with the Binary Data Type
D O 1 0/14 with the Binary Data Type