Rockwell Automation 2711 PANELBUILDER SOFTWARE USER MANUAL - Manual (Page 256)

Screen Operations
Chapter 8
8-4
IMPORTANT: If a screen is triggered by the PLC controlled option, or if
a screen is the Powerup screen, the screen will be displayed and no access
code will be requested regardless of the assigned security selections made.
The Powerup screen is the first screen displayed when the PanelView
terminal is switched on. You can set any screen to be the Powerup screen,
including the Alarm History or Alarm Status Screens. To define this
screen, choose Powerup Screen from the Screens menu, and select a screen
from the list of defined screens.
The Powerup screen is displayed, regardless of any security that has been
assigned to it.
Figure 8.3
Assigning the Powerup Screen
20149
FILE MENU: Screens Windows Options Communications Exit Screens
255 Alarm History
Select Screen 1 TEST SCREEN
Create New Screen
Utilities
Powerup Screen 255 Alarm History
Application File Comment
Quit
In an empty application file, the Powerup screen is preset to the Alarm
History screen (screen 255, by default) if the Alarm History screen is
enabled. The first screen you create in the application is automatically
assigned as the Powerup screen. Should this screen be deleted, the
Powerup screen will is reassigned to the next screen in the list. If screen
number 1 is deleted, screen number 2 will become the Powerup screen.
A warning message is displayed whenever the Powerup screen is
reassigned.
The Powerup screen is unassigned if there are no screens in the application
file and if both the Alarm History and the Alarm Status screens have their
screen numbers set to 0.
The Powerup Screen