Rockwell Automation 2711 PANELBUILDER SOFTWARE USER MANUAL - Manual (Page 346)

The Objects
Chapter 10
10-81
Buttons
Choose Buttons to enable or disable the buttons associated with the Cursor
List object through the Buttons Menu.
The following table shows the buttons that you can configure for this list,
as well as their default settings.
Table 10.AB
Buttons Associated with Scrolling List and Their Default Settings
Up Cursor Enabled
Down Cursor Enabled
Page Up Disabled
Page Down Disabled
Home Disabled
End Disabled
Enter Disabled
After you enable a button, you can configure it through the Button Enable
sub-menu.
If you disable a button, it disappears from the screen. When you enable a
button, the button appears in the middle of the screen. A menu also
appears. This menu allows you to configure the button:
Choose Move to move and position each button independently.
Choose Size to change the button’s size.
Choose Function Key to assign a function key number to the button.
This option is available only when you are configuring a keypad
terminal application.
Choose Margin Size to define the inactive region around the button.
This option is available only for touch screen applications.
Choose Edit Text to create text for each button. The button size limits
the amount of text you can create.
Choose Move Text to position the inner text associated with the button.
The size of the button determines how much you can move the text.
Choose Border to change the border type for each button. The default
border of the function key application is Single. For a touch screen
application, the default is Outer.