Rockwell Automation 2711 PANELBUILDER SOFTWARE USER MANUAL - Manual (Page 2)

Solid state equipment has operational characteristics differing from those of
electromechanical equipment. “Safety Guidelines for the Application,
Installation and Maintenance of Solid State Controls” (Publication SGI-1.1)
describes some important differences between solid-state equipment and
hard-wired electromechanical devices. Because of this difference, and also
because of the wide variety of uses for solid-state equipment, all persons
responsible for applying this equipment must satisfy themselves that each
intended application of this equipment is acceptable.
In no event will the Allen-Bradley Company be responsible or liable for
indirect or consequential damages resulting from the use or application of
this equipment.
The examples and diagrams in this manual are included solely for
illustrative purposes. Because of the many variables and requirements
associated with any particular installation, the Allen-Bradley Company
cannot assume responsibility or liability for actual use based on the
examples and diagrams.
No patent liability is assumed by Allen-Bradley Company with respect to
use of information, circuits, equipment, or software described in this
manual.
Reproduction of the contents of this manual, in whole or in part, without
written permission of the Allen-Bradley Company is prohibited.
Throughout this manual we use notes to make you aware of safety
considerations.
ATTENTION: Identifies information about practices or
circumstances that can lead to personal injury or death, property
damage or economic loss.
Attentions help you:
identify a hazard
avoid the hazard
recognize the consequences
IMPORTANT: Identifies information that is especially important for
successful application and understanding of the product.
PanelBuilder and PanelView are trademarks, and PLC is a registered trademark of Allen-Bradley
Company, Inc.
Intel is trademark of Intel Corp.
IBM, PC, XT, AT, PS/2, EGA, VGA and PC-DOS are registered trademarks of International Business
Machines Corporation
Epson is a registered trademark of Seiko Epson Corporation
Microsoft is a registered trademark of Microsoft Corporation
Mouse Systems is a trademark of MSC Technologies, Inc.
LOGITECH is a trademark of Logitech, Inc.
Important User Information