Rockwell Automation 2755 Enhanced Decoder Series B - Manual (Page 123)

Chapter
9
Publication 2755-833
Configuration: AUX and LCD
Display Parameters
The decoder can display the following on an auxiliary terminal or an
optional 2 line x 20 character per line alphanumeric LCD display to
monitor:
•
bar code data
•
output counters
•
decoder performance values
•
host messages
The AUX terminal and LCD display can each display bar code data,
output counter values and decoder performance indicators. The
parameters on the screen shown below control how this data is
formatted on both devices.
Each format parameter is defined below along with the field type and
possible values. The default value is shown in bold letters
Display Data
Field Type Options
Select
None
Aux Only
LCD Only
Aux and LCD
Controls whether the formatted data is sent to the AUX terminal
and/or the LCD display. The default is None, which disables the
display of data on both devices.
AUX and LCD Display
Parameters