Rockwell Automation 2755 Enhanced Decoder Series B - Manual (Page 126)

9–4 Configuration: AUX and LCD Display Parameters
Publication 2755-833
Position: Bar Code Strings
Field Type Options
Edit Numeric
0 through 40
0
Defines the character position at which to start displaying the bar
code data. The default of 0 disables the display of bar code data.
To start the bar code data display at a specific position, enter a
starting character position between 1 and 40. For example, to start
the display at character position 1, enter 1.
➀
Position: Decoder Performance
Field Type Options
Edit Numeric
0 through 40
0
Defines the character position at which to start displaying the
decoder performance values for Scanner A and (for DD decoders)
Scanner B. The performance indicator displays one value for each
scanner. Each is left justified and can be a value up to 100. For DD
decoders, the first value applies to Scanner A; the second value
applies to Scanner B. The default of 0 disables the display of this
data.
To determine the starting position for decoder performance display,
enter a starting character position between 1 and 40. For example, to
start the display at character position 21, select 21. Assuming
scrolling is disabled, the display will appear beginning in the first
position on the second line of the LCD display.①
Remember when selecting a starting position that you will need
space for up to 3 characters for a single scanner and 6 characters for
two scanners.
Position: Package Counter
Field Type Options
Edit Numeric
0 through 40
0
Defines the character position at which to start displaying the 6 digit
package counter. The default of 0 disables the display of the package
counter.
➀ The Default Prompt Message and host messages always start in position 1. To prevent other data fro
overwriting these messages on the LCD Display, select a position greater than the message length a
LCD scrolling.