Rockwell Automation 2755 Enhanced Decoder Series B - Manual (Page 66)

5–5 Introduction to AUX Terminal Configuration
Publication 2755-833
!
ATTENTION: If your application uses discrete
outputs, we recommend that you disable the outputs
during configuration to prevent unwanted state
changes.
To proceed with configuration while the outputs are enabled, press
the [Esc] key. To disable the outputs during configuration, press any
other key.
Note: The outputs remain disabled until you restart the system with
function E) Restart System.
After responding to the caution message, the selected configuration
screen is displayed.
!
ATTENTION: When controlling outputs locally
using configuration screens, suspend host
communications to prevent outputs from
unintentionally changing state.
This section provides some helpful hints on using and editing the
configuration screens including:
•
highlight
•
moving around the screen
•
data fields
•
editing data fields
•
audible beep
•
prompt line and command line
For example purposes, let’s look at one of the configuration screens
while going over editing conventions.
Editing Conventions