Rockwell Automation 2755 Enhanced Decoder Series B - Manual (Page 310)

B–2 Factory Default Settings
Publication 2755-833
Category of Parameters Default Setting Parameter
Bar Code Symbology Any
Match Code Text String Blank
Match Code Table (1 - 8)
Normal State O (Normally Open)
Match Code Table (1 - 8)
Source A for DS, A|B (A or B) for DD
Duration 0 msec
Scanner A Filter No
ac age etect Input
Scanner A Sense LO= Package
Package Detect Input
Scanner B Filter No
Scanner B Sense LO= Package
Counter Status Auto Refresh
Status of Counter Set Enabled
Mode Disabled
ten e Match Co e Ta le
Source A for DS, A|B (A or B) for DD
Extended Match Code Table
Symbology Any
Match Pattern String Blank
Count 0
Loading Blank (no outputs selected)
Display Data None
Message Format Unformatted
Scroll LCD Display No
Bar Code Strings Position 0
Decoder Performance Position 0
U an C ispla ormat
Package Counter Position 0
AUX and LCD Display Format
Symbols Not Read Counter
Position
0
Primary Counter 1 Position 0
Primary Counter 2 Position 0
Primary Counter 3 Position 0
Primary Counter 4 Position 0
Primary Counter 5 Position 0
Primary Counter 6 Position 0
Primary Counter 7 Position 0
Primary Counter 8 Position 0
Rule Number 1
Source A|B (A or B)
Symbology Any
Symbol Number All
ost Message eplacement
Find String Containging Blank
Host Message Replacement
ules
Replace Entire String With Blank
Rules
Minimum Field Length 0
Alignment Right
Fill Character None
Host Message Field Number All
Bar Code String Examples Blank