Rockwell Automation 2755 Enhanced Decoder Series B - Manual (Page 237)

15–49 ASCII Host Commands
Publication 2755-833
SD - Enable LCD Scrolling
Command Format: SDf
Function: Enables or disables scrolling of the LCD display.
Parameters: f
Command
Parameters
Parameter Function Values
f Enable Scrolling LCD Display
0= No
1= Yes
See Chapter 9 for details on how the LCD
Display operates when scrolling is enabled or
disabled.
Response: = rr <end>
rr = response code
<end> = end of message control code
Example:
Command: SD1
Parameters: 1
Command
Parameters
Parameter Function Values
f Enable scrolling LCD Display 1= Yes
Response: =00CR
00 = command complete
response code
CR = end of message control code
for Carriage Return