Rockwell Automation 2755 Enhanced Decoder Series B - Manual (Page 235)

15–47 ASCII Host Commands
Publication 2755-833
DF - Enable Data Display on AUX Terminal and LCD
Command Format: DFab
Function: Enables the AUX terminal and/or the LCD
Display to receive and display bar code data.
Note: Before data will display at the AUX
terminal, you must set the AUX port to manual
data entry mode (as described in Chapter 13).
Parameters: ab
Command
Parameter Parameter
Function
Valid Values
a
Enable device to
display formatted
bar code data.
0= None
1= AUX terminal and LCD Display
2= AUX terminal only
3= LCD Only
b
Specify format of
bar code data. 0= Unformatted
1= Host format
Response: = rr <end>
rr = response code
<end> = end of message control code
Example:
Command: DF11
Parameters: 11
Command
Parameter Parameter
Function
Values
a
Enable device to
display formatted
bar code data.
1= AUX terminal and LCD Display
b
Specify format of
bar code data.
1= Host format
Response: = 00LF
00 = command complete
response code
LF = end of message control code
for Line Feed