Rockwell Automation 2755 Enhanced Decoder Series B - Manual (Page 164)

12–2 Configuration: Host Communications
Publication 2755-833
Baud Rate
Field Type Options
Select
9600
4800
2400
1200
300
19200
38400
Selects the baud rate (data transmission speed) for the HOST port.
The default is 9600 the first time the decoder is started. From then
on, operation is determined at restart by the contents of storage
memory.
Bits/Char
Field Type Options
Select
8 Data 1 Stop
8 Data 2 Stop
7 Data 1 Stop
7 Data 2 Stop
Selects the number of data and stop bits transmitted with each
character via the HOST port. The default is 8 Data Bits, 1 Stop Bit
the first time the decoder is started. From then on, operation is
determined at restart by the contents of storage memory.
➀
Parity
Field Type Options
Select
None
Even
Odd
Selects the parity bit for each character transmitted or received at the
HOST port. The default is None the first time the decoder is started.
From then on, operation is determined at restart by the contents of
storage memory.
➀ The contents of storage memory can be reviewed by performing a Recall. Parameters are saved to s
memory with the Save command.