Rockwell Automation 2755 Enhanced Decoder Series B - Manual (Page 264)

15–76 ASCII Host Commands
Publication 2755-833
RE - Reset Decoder
Command Format: RE
Function: Resets decoder. Recalls the configuration from
storage memory and restarts the decoder.
Parameters: None
Response: = 97 <end>
97 = Indicates the command was
received and the decoder is
resetting. The reset takes
approximately 5 seconds.
<end>= end of message code
ID - Version of Software
Command Format: ID
Function: Read the version of decoder software presently
running.
Parameters: None
Response: aa.aa <end>=00<end>
aa.aa = Software revision number
00 = Complete and successful
response code
<end>= end of message control code