Rockwell Automation 2755 Enhanced Decoder Series B - Manual (Page 187)

14–5 Display and System Configuration
Publication 2755-833
The counters are six digit values that increment up to 999999. When
exceeding 999999, the display automatically advances to 000000.
To exit this function and return to the Select Operation menu, press
[ESC].
Resetting the Counters
You can reset the decoder status and counters to zero from the
Display Status and Counters screen. You can reset individual
counters by pressing a number 1 through 8, and answering [Y] to the
confirmation request that appears on the bottom of the screen.
You can reset reset the decoder status and all primary counters to
zero by pressing the [Space] bar. Press [Y] to reset the status and
counters. Press [N] or [Esc] to cancel the operation. This operation is
identical to the Reset Status and Counters function on the Select
Operation menu.
Note: The counters also reset when you restart the system with
function Restart System.
There is a second way to reset the decoder performance indicators
and all counters to zero from the Select Operation menu, select the
Reset Status and Primary Counters function. Press the “C” or “c”
key. Press [Y] to reset the decoder performance indicators and
counters to zero. Press [N] or [Esc] to cancel the operation. This
operation is identical to pressing [Space] on the Display Status and
Counters screen.
The Restart System function allows you restart the decoder. This
operation reboots the decoder, enables autoload functions, and
enables lotting, and activates certain host communications
parameters (Refer to Chapter 12).
To restart the decoder, press the “E” or “e” key. Press [N] or [Esc] to
cancel the operation and return to the Select Operation menu. Press
[Y] to restart the decoder.
During a restart, all configuration parameters are reset to the values
last saved to storage memory, and the Select Language screen is
displayed.
Restart System