Rockwell Automation 2755 Enhanced Decoder Series B - Manual (Page 160)

11–6 Configuration: Host Message Format
Publication 2755-833
Send Symbology
Field Type Options
Select
Yes
No
Controls whether the symbology type of the bar code is included in
the message sent to the host. The default is No, which means the
symbology type is not sent to the host.
If you select Yes, the symbology type is transmitted as a two digit
code:
00 Keyboard Data from AUX Terminal
01 Code 39
02 Interleaved 2-of-5
03 Codabar
04 UPC-A
05 UPC-E
06 EAN-8
07 EAN-13
08 Code 128
09 Pharma-Code
Send Package Count
Field Type Options
Select
Yes
No
Controls whether the package count is included in the message sent
to the host. The default is No, the package count is not sent to the
host.
The six digit package count is maintained by the package counter.
Counter data can also be sent to the host when requested by a host
command as described elsewhere in this manual.
Send Bar Code Strings
Field Type Options
Select
Yes
No
Controls whether bar code data is sent to the host. The default of Yes
sends bar code data to the host.