Rockwell Automation 2755 Enhanced Decoder Series B - Manual (Page 359)

Index I–9
Publication 2755-833
wild card character (?), 7-14
Processing Order, host message
replacement rules, 10-7
Publications, related, 1-4
Q
Question Mark
as metacharacter, 10-4
as wild card, 8-6
with host message replacement
rules, 10-4
Quiet Zone Ratio, PharmaĆCode,
6-11
R
Ratio, wide to narrow
(PharmaĆCode), 6-14
Read and No-Match Output
Condition, 7-18
Recalling Configuration Parameters,
using configuration screens,
5-11
Replacing Battery, 17-1
Replacing I/O Module Fuses, 17-2
Reset All Counts, 8-2
Reset Status and Primary Counters
Function, 14-5
Response Codes, descriptions of,
15-7
Response Mode
at end of trigger, 3-9
end of trigger, 3-9
immediately after valid package,
3-9
Restart System Function, 14-5
Restoring Default Configuration
affect on host communication
parameters, 5-12
using configuration screens, 5-12
S
Save Configuration, 14-6
Saving Configuration, using
configuration screen, 5-12
Scaning Modes, coordinated, 3-8
Scanner A Control
capture count, 7-6
decode modes, 7-2
inter-scan timer, 7-5
match complete, 7-8
no-read timer, 7-4
Symbols/package, 7-8
symbols/scan, 7-7
Scanner B Control, 7-8
decode modes, 7-9
trigger timeout, 7-11
Scanner B Start & Stop Characters,
15-55
Scanner Control, configuration, 7-1
Scanner Ports
Scanner Port A, 2-1
Scanner Port B, 2-1
Scanners, 2-11
available types, 2-11
Scanning
continuously, 7-2
turning laser off, 7-2
when triggered, 7-2
Scanning Mode
coordinated, 2-2, 3-8
independent, 2-2, 3-8
Scrolling, enabling LCD display,
9-3
Search Pattern, 8-6
Select CRT Type Screen, 5-3
Select Field, 5-7
Select Language Screen, 5-2, 14-6
Select Operation Menu, 5-3, 5-4
caution message on state of
outputs, 5-4
configure symbology, 6-1
display bar code strings function,
14-2
display status and primary counters
function, 14-3
host comunications parameters
screen, 12-1
host message format screen, 11-1
reset status and primary counters
function, 14-5
restart system function, 14-5
select language screen, 14-6
Select Operation Screen, save
configuration, 14-6
Send Message to Host
at end of trigger, 12-6