Rockwell Automation 2755 Enhanced Decoder Series B - Manual (Page 65)

5–4 Introduction to AUX Terminal Configuration
Publication 2755-833
Select an operation by pressing a number key from [1] to [8] or [A]
to [G]. Press [Esc] to return to the previous screen.
Each operation is described in the sections that follow.
The eight numbered options on the Select Operation menu access
configuration functions:
1. Symbology
2. Scanner Control, Primary Match Table, Discrete I/O
3. Extended Match Table and Counters
4. Aux and LCD Display Format
5. Host Message Replacement Rules
6. Host Message Format
7. Host Communications
8. Aux Terminal Data Entry
9. If you select one of these options while the discrete outputs are
enabled, the following caution message displays.
The message informs you that configuration changes could change
the state of the discrete outputs.
Configuration Functions