Rockwell Automation 2755 Enhanced Decoder Series B - Manual (Page 360)

Index I–10
Publication 2755-833
immediately after valid trigger,
12-6
Source, in Extended Match Code
Table, 8-5
Source of Event, 7-16
Space Tolerance, PharmaĆCode,
6-12
Start & Stop Characters, For Scanner
B, 15-55
Start Scan Character, 12-5
status of counter set, 8-3
Stop Scan Character, 12-5
Storage Memory, 3-6
Supplements
EANĆ13, 6-10
EAN-8, 6-9
UPC-A, 6-7
UPC-E, 6-8
Symbologies, 3-1, 6-1
Codabar, 6-5
Code 128 and specific lengths,
6-6
Code 39 and specific lengths, 6-2
EANĆ13 and supplements, 6-10
EAN-8 and supplements, 6-9
enabling EANĆ8, 6-9
enabling EANĆ13, 6-10
enabling PharmaĆCode, 6-10
in Extended Match Code Table,
8-5
specific length checking, 6-1
UPC-A and supplements, 6-7
UPC-E and supplements, 6-8
Symbols Not Read Counter, 7-17,
9-5, 14-4
Symbols/Package, 7-8
coordinated mode, 7-10
independent mode, 7-10
Symbols/Scan, 7-7
T
Terminal Connections and Setup,
D-1
Transmission Check, 12-7
checksum - LSB, 12-7, C-1
checksum - MSB, 12-7, C-1
example, C-1
LRC (Longitudinal Redundancy
Check), 12-7
Trigger End Conditions, 3-9
Trigger Sources
host, 7-3
host command, 3-8
internal timer, 3-9, 7-3
package detect, 3-8
package detect signal, 7-3
start/stop scan characters, 12-5
Trigger Timeout
and decode mode, 7-9
Scanner B, 7-11
Troubleshooting, 17-3
U
UPC-A
enabling, 6-7
supplements, 6-7
UPC-E
enabling, 6-8
supplements, 6-8
V
Valid Scan, defined, 7-9
Validation, of PharmaĆCode symbols,
6-15