Rockwell Automation 2755 Enhanced Decoder Series B - Manual (Page 163)

Chapter
12
Publication 2755-833
Configuration:
Host Communications
Function 7 on the Select Operation menu accesses the Host
Communications menu screen from which you can control
communications for the HOST port of the decoder. The screen
displays with the first field highlighted.
The default settings are displayed the first time you access this
screen. Make changes appropriate for your application. If the factory
defaults are satisfactory, you can exit the configuration software by
pressing [Esc] twice, or move on to the AUX Terminal Data Entry
configuration screen by pressing [Esc][Return]
Host communication parameters (Baud Rate, Bits/Char, Parity,
Host Protocol, Device Address, ACK/NAK Char) do not take
effect until you SAVE them and restart the decoder.
Each parameter is defined below along with its field type and
possible values. The default value is shown in the table in bold
letters.
Host Communications