Rockwell Automation FlexPak 3000 Power Module Version 4.2 User Manual
Page 164
APPENDIX C
FlexPak 3000
49’1340 e
C-8
MOP OUTPUT (P.191)
The output of the motor operated potentiometer (MOP). If the I/O Expansion Kit is not installed,
the MOP OUTPUT is always at MINIMUM SPEED.
See input parameter MOP ACCEL TIME for discussion and block diagram.
Parameter Range:
MINIMUM SPEED to MAXIMUM SPEED
OIM Menu Path(s):
Drive Reference - Drive Reference Test Points
Refer also to Parameters:
MOP RESET ENABLE (P.116),
MAXIMUM SPEED (P.004)
MINIMUM SPEED (P.003),
MOP ACCEL TIME (P.115)
MOP DECEL TIME (P.120)
NETW COMM STATUS (P.908)
Indicates the status of network communication. NOT ACTIVE means the network board is not
communicating with the master. ACTIVE means the network board is communicating with the master.
Parameter Range:
NOT ACTIVE,
ACTIVE
OIM Menu Path(s):
Network Communications
NETW IN REG 1 (P.905)
Indicates the value being written by the network master to drop_1, register 34.
See the AutoMax Network Communication Board I/M for more information.
Parameter Range:
-4095 to 4095
OIM Menu Path(s):
Network Communications
NETW IN REG 2 (P.906)
Indicates the value being written by the network master to drop_1, register 35.
See the AutoMax Network Communication Board I/M for more information.
Parameter Range:
-4095 to 4095
OIM Menu Path(s):
Network Communication
NETW IN REG 3 (P.907)
Indicates the value being written by the network master to drop_1, register 36.
See the AutoMax Network Communication Board I/M for more information.
Parameter Range:
-4095 to 4095
OIM Menu Path(s):
Network Communication
NETW TYPE & VERSION (P.909)
Indicates the type of network card installed and its software version. Format: TV.xx where
T = Network card type:
2 for AutoMax Network (incl. Profibus, Interbus), 4 for DeviceNet, 5 for ControlNet
V = Network card software version: 1 for AutoMax SW, 7 for Profibus SW, 8 for Interbus SW
.xx = Network card software version subindex.
OIM Menu Path(s):
Network Communications
NETWORK KIT (P.796)
Indicates the status of the network option board.
OIM Menu Path(s):
Network Communications
Drive Information