Rockwell Automation FlexPak 3000 Power Module Version 4.2 - Manual (Page 20)

INTRODUCTION TO THE DRIVE
FlexPak 3000 49’1340 e 2-12
FAULT
This key allows the operator to review and clear logs (fault and alarm), reset faults,
clear the alarm indicator and display fault history and diagnostic information for
servicing the drive. The state of this key (FAULT, ALARM or DIAGS) is shown on
the LCD directly above the key.
• Pressing the FAULT key once will display the fault menu:
Fault Menu
➤
Review Log
Reset Faults
Clear Fault Log and Reset Faults !!
!!
FAULT KEYPAD MANUAL FORWARD
• Pressing the FAULT key a second time will display the alarm menu.
Pressing the CANCEL key will return the OIM to the previous display mode (PROGRAM or
MONITOR).
Alarm Menu
➤
Review Log
Reset Alarms
Clear Alarm Log and Reset Alarms !!
!!
ALARM KEYPAD MANUAL FORWARD
• Pressing the FAULT key a third time will display the diagnostics menu.
Pressing the CANCEL key will return the OIM to the previous display mode (PROGRAM or
MONITOR).
Diagnostics Menu
➤
Why is the drive not ready?
Why did the drive stop? !!
!!
DIAGS KEYPAD MANUAL FORWARD
• Pressing the FAULT key after the third time will re-display the fault menu.
To exit this mode, press PROGRAM/MONITOR. This returns the OIM display to the previous
display mode (PROGRAM or MONITOR).
See Section 7 of this instruction manual for further details on the FAULT, ALARM, and DIAGS
menus.
HELP
?
Menu and Parameter HELP are available. Access Menu or Parameter HELP by
pressing the HELP key when the cursor is at the particular menu or parameter of
interest. In the MONITOR mode, pressing HELP displays status indicators in the
selected language. Pressing CANCEL at anytime will return to the display
from the previous screen.
MENU HELP
Menu HELP provides the user with information regarding the general purpose of the menu and
some details of related parameter selections.
For example: If English is the selected Language, the following is displayed when HELP is
pressed when at the Main Menu.