Rockwell Automation FlexPak 3000 Power Module Version 4.2 - Manual (Page 58)

DRIVE SETUP AND ADJUSTMENT
FlexPak 3000 49’1340 e 4-16
4.14.5.2 Define Load Units
Define User Units
➤ Define Speed Units
Define Load Units
$$
$$
Fault
Alarm
Interlock OK
Drive Ready
Running
Current Limit
Torque Limit
PROGRAM KEYPAD MANUAL FORWARD
1. Move the cursor to Define Load Units and then press ENTER. The following value entry
screen appears:
Define Load Units
LOAD UNITS SELECT
%FLA
➤ %FLA
AMPS
$$
$$
Fault
Alarm
Interlock OK
Drive Ready
Running
Current Limit
Torque Limit
PROGRAM KEYPAD MANUAL FORWARD
2. Choose the units of your choice and then press ENTER.
3. Press CANCEL to return to the Define User Units menu. Press CANCEL a second time to
return to the Operator Interface menu.