BUCHI DuMaster D-480 - Manual (Page 103)

Operation Manual D-480 ©BÜCH Labortechnik AG
5 - Work performed by the system administrator 103
Modifying the registration
Dialog: "Product registration"
When you start the operating software for the first time, the "Product Registration" dialog is displayed.
Once you have registered, the dialog is no longer displayed when you launch the program.
Changing the registration
You must have administrator rights to modify the registration.
Modifying
Proceed as follows:
 Launch the operating software.
 Open the "Product registration" dialog by selecting Help > Registration.
 If you want, enter your address data in the "User" section.
 Enter the serial number in the field "Serial num." of the "Analyzer" section if you have not already
done so. The serial number is found on the type plate on the back of the analyzer. This number
should match the serial number of the installation CD cover when installing for the first time.
 Enter the software ID in the field "Software ID" of the "Software" section. If installing for the first
time, this number is found on the installation CD cover. If installing and upgrading, you must send
the registration details in this dialog to BÜCHI. You will then receive an identification code to be
entered here.
 Click OK. This closes the dialog and saves the settings.
Printer setup
Printer setup
Proceed as follows:
 Open the "Printer setup" dialog by selecting File > Printer Setup.
 Select the desired printer type from the "Name" dropdown listbox.
 Click Properties. A "Properties" dialog is displayed that varies depending on the type of printer
connected.
 Define your settings in the "Properties" dialog and then click OK. Your settings are saved and the
dialog is closed.
 Click OK in the "Printer setup" dialog. Your settings are saved and the dialog is closed.
 You have successfully setup the printer.