BUCHI DuMaster D-480 - Manual (Page 113)

Operation Manual D-480 ©BÜCH Labortechnik AG
6 - Starting up and shutting down the instrument 113
Removing the furnace transport protection
Proceed as follows:
 Open the front door of the instrument.
 Push the right side door open from inside (magnetic lock). The transport protection is now visible
in the form of a bracket (1).
 Unscrew the screws and remove the bracket.
 Fasten the bracket on the rear casing angle (1). It should be stored there so that it does not get
lost.
 Close the right side door and screw the big screw back in that keeps the door closed.
Removing the water trap transport protection
Proceed as follows:
 Open the front door of the instrument.