BUCHI DuMaster D-480 - Manual (Page 84)

Operation Manual D-480 ©BÜCH Labortechnik AG
5 - Work performed by the system administrator 84
Safety instruction
Strictly observe the safety instruction "Improper changes" under Warning notes during operation
(on page 24).
Granting authorizations
Proceed as follows:
 Open the "Device configuration" dialog by selecting Options > Configuration.
 Select the "DEVICE.INI" tab. Select the "Menu" section by clicking the arrow next to the "Section"
dropdown listbox. In the field "Items" all menu commands are listed. The numbers of the menu
commands have the following meaning:
 1: User, superuser and administrator are authorized to execute the command.
 2: Only superuser and administrator are authorized to execute the command.
 3: Only the administrator is authorized to execute the command.
 In the field "Items" select the command whose authorization you want to change and click Edit.
The "Configure key value" dialog is displayed:
 In the field "Value" change the menu command's prefixed number to the desired value (1...3) and
click OK. The "Comment modification" dialog is displayed.
 Enter a justification in the "Comment modification" dialog and click Close.
 Click OK in the "Device configuration" dialog. Your settings are saved and the dialog is closed. A
message window appears which informs that the modification will only become operative after
the instrument software has been left and re-started.
 Click OK and quit the operating software.
 Restart the operating software as required.