BUCHI DuMaster D-480 - Manual (Page 160)

Operation Manual D-480 ©BÜCH Labortechnik AG
7 - Using the instrument 160
 Edit the imported data as required and save them when you are finished.
Exporting LIMS data
Selecting data to send
Proceed as follows:
 Open the "LIMS settings" dialog by selecting Options > Settings > LIMS.
 Open the "LIMS data" tab.
 Decide:
If you want to...
 ... send data: Check the appropriate checkbox in the "Data to send" section.
 ... not send data: Uncheck the appropriate checkbox in the "Data to send" section.
 Click OK in the "LIMS settings" dialog. Your settings are saved and the dialog is closed.
Auto-exporting LIMS data
Proceed as follows:
 Open the "LIMS settings" dialog by selecting Options > Settings > LIMS.
 Open the "LIMS data" tab.
 Check the "Auto-export data after every analysis" checkbox.
 Click OK in the "LIMS settings" dialog. Your settings are saved and the dialog is closed. The
software now sends analysis data to LIMS after every analysis.
Exporting LIMS data manually
Proceed as follows:
 Open the "Export to LIMS" dialog by selecting File > Export/Import > Export to LIMS.
 Select the desired option.
 Click OK in the "Export to LIMS" dialog. The export process is performed.