BUCHI DuMaster D-480 - Manual (Page 35)

Operation Manual D-480 ©BÜCH Labortechnik AG
3 - Product description 35
Furnace section
Location of the furnace section
The furnace section is located behind the front door of the instrument. The front door is held by a
magnet, thus it can be opened easily.
What is inside the furnace section?
The furnace section contains a furnace with three independent heaters. The temperatures of the
heaters are pre-selected from the PC. All heaters are temperature-monitored by the software and can
be shut down in the event of a malfunction.
Where are the reaction tubes in the furnace section?
 The post combustion tube is located on the left.
 The combustion tube is located in the middle.
 The reduction tube is located on the right.
Furnace section
The following picture shows the furnace section of the instrument:
Legend:
1 Combustion tube, behind angle bracket
2 Post combustion tube
3 Reduction tube