Keywords (dialog), H_741, H_796 – BUCHI DuMaster D-480 User Manual
Page 309: O_409
Operation Manual D-480
©BÜCH Labortechnik AG
10 - Menu and dialog descriptions
309
Label
Element type
Meaning
Name
Textbox/label
Field to input the name of the standard sample.
{Element} conc. [%]
(or {Element} conc.
[ppm])
Textbox/label
Field to input the theoretical percentage content of the
corresponding element in the respective sample.
{Element} tolerance
[%]
Textbox/label
Field to input the tolerance limit of the corresponding
element. The tolerance limit is required if standard
tolerance monitoring is enabled.
New
Button
Allows the definition of a new standard sample. This
function empties the input boxes, thus data for a new
standard sample can be entered.
Delete
Button
Deletes a standard sample previously selected in the
listbox.
Save/Create
Button
Saves changes of an existing standard sample or creates
and saves the settings of a newly defined standard sample.
Close
Button
Closes the dialog.
Further information
Further information includes instructions in which the dialog is used and knowledge articles
concerning the dialog:
Defining standard substances as factor and monitor samples (on page 122).
Defining standard substances as calibration samples (on page 122).
Viewing list of defined factor, monitor and standard samples (on page 121).
Keywords (Dialog)
Function
In this dialog you specify keywords for conditioning samples and blank value samples. A key word is
a reserved sample name that the software recognizes and interprets in a special way.
Note
Keywords are already defined for conditioning samples and blank value samples. You can change
keywords, but you must observe the following:
The names must be distinguishable.
The program does not distinguish between uppercase and lowercase, so "BLANK" has the same
meaning as "blank", for example.
Open
Open the dialog via Options > Settings > Keywords.
Elements
The following describes the elements of the dialog.
Label
Element type
Meaning
Conditioning sample
name
Textbox
Field to input the key word for conditioning samples.
Name blank value
Textbox
Field for input of the keyword for blank samples
OK
Button
Saves the keywords.
Cancel
Button
Discards keywords not yet saved.