Emptying reaction tubes, O_3743 – BUCHI DuMaster D-480 User Manual

Page 221

Advertising
background image

Operation Manual D-480

©BÜCH Labortechnik AG

8 - Maintaining the instrument

221

Emptying reaction tubes

Requirements:

Before starting work, the following requirements must be met:

The reaction tubes have been removed from the furnace.

The reaction tubes have cooled down.

Keep a tube extractor ready.

Safety instruction

Strictly observe the safety instruction "Emptying the reaction tubes" under Warning notes during
operation
(on page 24).

Emptying the combustion tube

Proceed as follows:

 Insert the tube extractor into the combustion tube. After clamping the crucible tongs in the ash

crucible, pull the ash crucible out.

 Empty the ash crucible.

 Empty the copper oxide out of the combustion tube.

 Remove the wire mesh ronde and the spacer out of the combustion tube.

 Remove the CuO dust out of the combustion tube by means of a damp cloth.

 Dispose of the chemicals according to the relevant disposal categories.

Emptying the reduction tube

Proceed as follows:

 Remove the silver wool. You can re-use the silver wool if the surface is still shiny and silvery.

 Remove the copper and copper oxide.

 Place the reduction tube upside-down on a soft surface, e.g. cork.

 Tap on the reduction tube. The exhausted tungsten in the form of WO

3

slides slowly out of the

tube.

 Remove the wire mesh ronde and the corundum balls.

 Remove the WO

3

dust by means of a damp cloth.

 Check whether a salt crust is visible in the tube. Remove the crust with a suitable solvent.

 Dispose of the chemicals according to the relevant disposal categories.

Emptying the post combustion tube

Proceed as follows:

 Remove the silver wool. Usually, the silver wool has turned to black/grey and is used-up.

 Remove the corundum balls.

 Remove the CuO and the Pt catalyst.

 Remove the corundum balls.

 Remove the wire mesh ronde and the spacer.

 Remove the CuO dust and, if applicable, the crust of salt by means of a damp cloth.

 Dispose of the chemicals according to the relevant disposal categories.

Advertising