BUCHI DuMaster D-480 - Manual (Page 95)

Operation Manual D-480 ©BÜCH Labortechnik AG
5 - Work performed by the system administrator 95
Defining the autoexport directory
Safety instruction
Strictly observe the safety instruction "Improper changes" under Warning notes during operation
(on page 24).
Selecting a directory
Proceed as follows:
 Open the "Device configuration" dialog by selecting Options > Configuration.
 Select the "DEVICE.INI" tab. Select the "AutoExport" section by clicking the arrow next to the
"Section" dropdown listbox.
 Select in the "Items" listbox the entry "directory" and click Edit. The "Configure key value" dialog
is displayed:
 Enter the desired dirctory in the "Value" field and click OK. The "Comment modification" dialog is
displayed.
 Enter a justification in the "Comment modification" dialog and click Close.
 Click OK in the "Device configuration" dialog. Your settings are saved and the dialog is closed. A
message window appears which informs that the modification will only become operative after
the instrument software has been left and re-started.
 Click OK and quit the operating software.
 Restart the operating software as required.
Further information
Further information can be found in:
 Database backup (on page 95).
Database backup
What happens during backup?
Backup copies the complete existing database file to a certain directory under a different name,
thereby "capturing" a certain state.
Backup settings
The following backup settings are available:
 Auto-start backup:
 daily
 every X minutes
 every X hours
 once at a certain time
 Start backup manually
Auto-save
The document currently open is automatically saved to a temporary file every 3 minutes if it is
changed.