BUCHI DuMaster D-480 - Manual (Page 341)

Operation Manual D-480 ©BÜCH Labortechnik AG
10 - Menu and dialog descriptions 341
In section "Analyzer":
Label Element type Meaning
Type Dropdown listbox Field displaying the instrument type.
Serial number Textbox Field to input the serial number if it was not automatically
sent to the program by the analyzer. The serial number is
found on the type plate on the back of the analyzer. This
number should match the serial number of the installation
CD cover when installing for the first time.
In section "Software":
Label Element type Meaning
Version Label This field displays the software version number.
Software ID Textbox Field to input the identification code. If installing for the first
time, this number is found on the installation CD cover. If
installing and upgrading, you must send the registration
details in this dialog to BÜCHI. You will then receive an
identification code to be entered here.
It is not possible to operate the system if the identification
code is missing or incorrect.
Remaining elements:
Label Element type Meaning
OK Button Saves new settings
Cancel Button Discards settings not yet saved.
Further information
Further information includes instructions in which the dialog is used and knowledge articles
concerning the dialog:
 Modifying the registration.
Help > About DuMaster (Command)
What is the command used for?
This command displays the following:
 The copyright note.
 The software version number.
If the system is connected, the version numbers of the individual modules are also displayed. They
provide valuable information about the status of the system and what to do in the event of updates.
Short cuts
Invocation via the toolbar: