BUCHI DuMaster D-480 - Manual (Page 279)

Operation Manual D-480 ©BÜCH Labortechnik AG
10 - Menu and dialog descriptions 279
 by clicking the right mouse key to the corresponding sample cell. Select Set current sample...
from the popping-up context menu.
Elements
The following describes the elements of the dialog.
Label Element type Meaning
Current sample at: Textbox with
buttons Field to input a sample number
You can also set the sample number in the textbox using
the arrows.
OK Button Saves the setting.
Cancel Button Aborts the process.
Further information
Further information includes instructions in which the dialog is used and knowledge articles
concerning the dialog:
 Reacting to a power failure (on page 248).
 Right mouse button function (on page 69).
Set current weighed sample (Dialog)
Function
You set the number of the current weighed sample in the dialog. The current weighed sample is the
sample that receives a weighing value next. It is only necessary to set the current weighed sample
after breakdowns, for example if you lose a sample already when you put it on the carousel and
therefore need to weigh in another sample.
Open
Open the dialog:
 via the menu command Edit > Current weight or
 by clicking the right mouse key to the corresponding sample cell. Select Set current weight...
from the popping-up context menu.
Elements
The following describes the elements of the dialog.
Label Element type Meaning
Current weighed
sample at: Textbox with
buttons Field to input a sample number
You can also set the sample number in the textbox using
the arrows.
OK Button Saves the setting.
Cancel Button Aborts the process.
Edit > Update hole positions (Command)
What is the command used for?
By this command the hole positions of the individual samples will be calculated from anew.