BUCHI DuMaster D-480 - Manual (Page 308)

Operation Manual D-480 ©BÜCH Labortechnik AG
10 - Menu and dialog descriptions 308
Label Element type Meaning
autom. Auto-
increment the number
in the sample name Radiobutton If a sample name ends with a number (e.g. "Name001"),
this figure is automatically incremented by a certain amount
and suggested for the next sample (e.g. "Name002").
Exceptions:
 If the number of characters is completely used up (e.g.
"Name999"), it is not incremented and the same name
is suggested for the next sample.
 If the figure is not at the end of the sample name (e.g.
"Name001xyz"), it is not incremented.
autom. Auto-
decrement the
number in the sample
name Radiobutton Works the same way as auto-increment, only the figure in
the name is decremented.
Exception:
 The figure "zero" is not decremented.
Increment/decrement
interval Textbox with
Buttons
In this field you can input the interval at which to
increment/decrement the figure in the name. This figure
can be between 1 and 99. The number must, however, fit
in the displayable number of digits, otherwise the number is
not changed.
Fill method names to
stop marker Checkbox If, for example, you have input/copied 10 successive
sample names with the sample memory empty, the stop
marker is now at the tenth sample. If you have input a
method name for the first sample, this name is entered for
all ten samples.
Fill daily factors to
last sample Checkbox The daily factor input for the first sample is entered for all
subsequent samples.
Fill blank values to
last sample Checkbox The blank value input for the first sample is entered for all
subsequent samples.
OK Button Saves new settings
Cancel Button Discards settings not yet saved.
Further information
Further information includes instructions in which the dialog is used and knowledge articles
concerning the dialog:
 Settings for sample input (on page 133).
 Optimizing sample data editing (on page 99).
Standard samples (Dialog)
Function
In this dialog you can create, delete, view, copy and change standard samples.
Open
Open the dialog by selecting Options > Settings > Standards.
Elements
The following describes the elements of the dialog.
Label Element type Meaning
--- Listbox This field lists all standard samples already defined.