BUCHI DuMaster D-480 - Manual (Page 79)

Operation Manual D-480 ©BÜCH Labortechnik AG
5 - Work performed by the system administrator 79
Creating new sections
Safety instruction
Strictly observe the safety instruction "Improper changes" under Warning notes during operation
(on page 24).
Creating new sections
Proceed as follows:
 Open the "Device configuration" dialog by selecting Options > Configuration.
 Select the tab for which you want to create a new section.
 Enter the name of the new section in the "Section" dropdown listbox and click New Section to
the right of it. The "Comment modification" dialog is displayed:
 Enter a justification in the "Comment modification" dialog and click Close.
 Click Insert in the dialog "Device configuration" to insert an entry into the section just created.
The "Configure key value" dialog is displayed:
 Enter your values in the "Key" and "Value" fields and click OK. The "Comment modification"
dialog is displayed.
 Enter a justification in the "Comment modification" dialog and click Close.
 Click OK in the "Device configuration" dialog. Your settings are saved and the dialog is closed. A
message window appears which informs that the modification will only become operative after
the instrument software has been left and re-started.
 Click OK and quit the operating software.
 Restart the operating software as required.