Setting up aal5 or aal0 encapsulation, Figure 4–41. atm encapsulation configuration menu, Figure 4–42. atm pcr configuration menu – Verilink Net Engine (3150-30626-001) Product Manual User Manual
Page 103: Setting up proprietary voice encapsulation
NetEngine IAD User Guide
WAN Configuration
84
Setting up AAL5 or AAL0 Encapsulation
1. Type
1
to select AAL5, or type
2
to select AAL0 encapsulation.
2. The IAD displays the ATM Service Category Configuration menu:
Figure 4–41. ATM Encapsulation Configuration Menu
Type
1
to select CBR for high priority data
—or—
Type
2
to select UBR for low priority data.
3. The IAD displays the Peak Cell Rate Configuration menu:
Figure 4–42. ATM PCR Configuration Menu
Type the PCR value or press Enter to set the PCR to the maximum
rate for the current line speed.
4. The IAD saves the configuration and displays the ATM PVC
Configuration menu.
Setting up Proprietary Voice Encapsulation
1. Type
3
to select Proprietary Voice encapsulation over a specific PVC.
2. The IAD saves the configuration and displays the ATM PVC
Configuration menu.
Setting up RFC 1483 (VC Muxing) or RFC 1483 (LLC
Encapsulation)
1. Type
4
to select RFC 1483 encapsulation with VC Muxing or type
5
to
select RFC 1483 with LLC encapsulation.
2. The IAD displays the ATM Service Category Configuration menu:
*****************************************
ATM Service Category Configuration
*****************************************
Current Encapsulation: NONE
1. CBR
2. UBR
*******************************************
ATM Peak Cell Rate (PCR) Configuration
*******************************************
Current line speed for this interface is 1544000 bps
Please type a PCR value, or
Press ENTER to accept allowed maximum PCR value for
this line speed
Enter Peak Cell Rate (PCR) [3641 cells per second]: