Verilink Net Engine (3150-30626-001) Product Manual User Manual
Page 223
NetEngine IAD User Guide
IAD Reports
204
WAN DataLink Protocol
Totally Transparent | Raw HDLC | Cisco
compatible HDLC | IP-Plus compatible HDLC |
PPP (over Raw HDLC) | ATM | Frame Relay
xDSL type
G.SHDSL Annex A (U.S.) | G.SHDSL Annex B
(Europe) | SDSL
Firmware Version
version of firmware
ADSL Standard for Startup
T1.413 | G.LITE | G.DMT | Alcatel 1.4 | Multi-
Mode | ADI | ALCATEL
SDSL Mode
Customer Premises Equipment (CPE) or
Central Office (CO)
Mode
CPE or CO
Line Rate
Auto | Fixed | 1152 Kbps | 768 Kbps | 384
Kbps | 192 Kbps | 2320 Kbps or manually set
Payload Scrambling
enabled | disabled (ATM only)
Frame Relay Management
maintenance protocol (Frame Relay only)
RIP
enabled | disabled
Poisoned Reverse
enabled | disabled
Dynamic Host Configuration
Protocol (DHCP) Client
enabled | disabled
Bridging
enabled | disabled
Spanning Tree
enabled | disabled
Port Priority
0-255 (default = 128)
Path Cost
1-65,535 (default = 32,768)
T1/E1 Only
T1 Frame Mode
ESF | D4
E1 Frame Mode
FAS | FASC (CRC4 enabled) | Multi-Frame
CAS | Multi-Frame CAS (CRC4 enabled
Binary 8 Zero Substitution
(B8ZS)
enabled | disabled
Line Build Out
Distance in feet: 0 to 133 | 133 to 266 | 266 to
399 | 399 to 533 | 533 to 655 | -7.5 dB | -15 dB
| -22.5 dB
Tx Clock Source
external | internal
Tx Channels Enabled
Rx Channels Enabled
HDB3 coding
enabled | disabled
Payload Scrambling
enabled | disabled
Port #
Sa4 Bit
set | cleared
Sa5 Bit
set | cleared
Sa6 Bit
set | cleared
Sa7 Bit
set | cleared
Table 12–1. Current Configuration Report
Parameter
Description