Verilink Net Engine (3150-30626-001) Product Manual - Manual (Page 265)

NetEngine IAD User Guide
Command Line Interface 246
reset
system
Description. Performs a soft system reset.
reset system
Discussion. Any time you use the menu or command line interface to
make setting changes, or change any of the physical characteristics of the
IAD (such as changing the MAC address of the Ethernet port), you must
reset (or restart) the IAD for the new settings to take effect. An alternative
to issuing the reset command is to simply turn off (or unplug) the IAD, and
power it back on, forcing it to reboot.
remove lan
ip address
Description. Removes the LAN IP address. If you do not enter any
optional parameters, the IAD locates and removes the first available slot,
interface, port and connection.
remove lan ip address <IP address> <netmask> (slot)
(interface) (port) (connection)
IP address
IP address to remove, in octal format (999.999.999.999)
netmask
Subnet mask in octal format (255.255.255.255)
slot
Slot number (1 to 7)
interface
Keyword identifying the interface: ETHERNET | ADSL | XDSL | SDSL
port
Port number (1 to 8)
connection
Index of this IP address associated with the port (0-7)
set bridge
global
Description. Enable or disables bridging globally.
set bridge global <on | off>
on | off
Keyword to enable (on) or disable (off) bridging globally.
CAUTION Rebooting the IAD terminates all telephone calls in process,
and data sessions in process. Ensure that there are no
services being rendered before you reset the IAD.