Verilink Net Engine (3150-30626-001) Product Manual - Manual (Page 250)

NetEngine IAD User Guide
IAD Reports 231
G2237 xDSL Statistics Report
Table 12–21.G2237 xDSL Statistics Report
Parameter Description
Operational State Current operation state.
Start Progress Current start progress.
Operational Seconds Total Operation Time in Seconds
Up/Down Counter No. of times modem has come up.
Received SNR No. of SNR (Signal-to-Noise Ration) received.
Mean SQ Error No. of mean SQ error used to compute received
signal to noise ratio.
Initial Received SNR No. of the Initial Received SNR (Signal-to-Noise
Ration)
Loop Attenuation Current level of Loop Attenuation
Actual PSD Mask Actual PSD mask is used for the line code
comparison. It is acknowledged that an optimized
PSD mask can be decided only after line code
decision is made. The transmit power back-off of
remote HTU
Framer Sync Current framer synchronization status: In-Sync /
Out of Sync
LOSW Status Current status of LOSW (Loss of Sync Defect): ON
/ OFF
Total Seconds Total seconds of statistics gathering.
Errored Seconds Total errored seconds received of CRC and LOSW
errors found.
CRC Count No. of CRC errors (near end) received.
LOSW Defect Count No. of LOSW Defect (Loss of Sync Defect) errors
received.
FEBE Count No. of Far End Block Error Count (far end).
Tip/Ring Current status of Tip/Ring: Normal / Reserved.
Transmit Power Nominal transmit power.
Receiver Gain Current no. of total receiver gain.
G.SHDSL
Remote Country Code Current Remote Country Code.
Remote Provider Code Current Provider Code.