Configuring emptycells – Verilink Net Engine (3150-30626-001) Product Manual User Manual
Page 111
Advertising
NetEngine IAD User Guide
WAN Configuration
92
4. Press any key to display the ATM Configuration menu.
Configuring EmptyCells
1. On the ATM Configuration menu, type
6
to select Configure
EmptyCells.
2. The IAD displays the following instructions.
Empty Cells are currently IDLE
Enter 1 for IDLE cells or 2 for UNASSIGNED cells:
Type
1
to select Idle cells, or type
2
to select Unassigned cells.
3. Reset the IAD (page
) when you finish ATM configuration.
Advertising