Verilink Net Engine (3150-30626-001) Product Manual - Manual (Page 175)

NetEngine IAD User Guide
Voice Path Configuration 156
Figure 7–16. CopperCom Configuration Menu
Type the option for the command to execute and proceed to the
appropriate section.
Displaying CopperCom Configuration
Type D to display the current configuration settings.
The IAD displays the following information:
Configuration:
Current Frame Relay Mode = 44 octets & Multiple
packets
Setting Compression Format
You can set compression globally or by port.
1. Type C to set the compression format.
2. The IAD displays the port prompt:
Configure Compression Format for Port (0 for ALL):
Type the port number, or type 0 to set the compression for all ports.
3. The IAD displays the port prompt:
Select Compression
1. PCM64K
2. ADPCM32K
Compression ():
Type the option for the selected compression.
4. The IAD saves the changes and displays the menu.
5. Press Escape to return to the CopperCom Configuration menu and
continue configuration.
6. Reset the IAD (page 15 ) when you finish voice path configuration.
Setting Framing Format
1. Type F to display the CopperCom Configuration menu with Frame
Relay mode options:
Figure 7–17. CopperCom Statistics Menu
*******************************************
CopperCom Configuration
*******************************************
D. Display Configuration
C. Compression Format
F. Framing Format
*******************************************
CopperCom Configuration
*******************************************
Current Frame Relay Mode = 44 octets & Multiple packets
1. 36 octet packet, Single packet per frame
2. 44 octet packet, Multiple packets per frame