Verilink Net Engine (3150-30626-001) Product Manual - Manual (Page 25)

NetEngine IAD User Guide
Introduction 6
Figure 1–4. 7000 Family IAD Front Panel
Rear Panel Connectors
On the rear panel, the IAD contains several connectors. The WAN
connectors vary by IAD—both are present, but one has a permanently
attached metal shield to prevent use.
Figure 1–5. 7000 Family IAD Back Panel
Table 1–2. Front Panel LEDs
LED Description
POWER Illuminates when the IAD is powered on.
LAN LINK Illuminates when there is an operational LAN connection
on the Ethernet port.
LAN ACT Flashes when there is activity on the Ethernet port.
WAN LINK Flashes as the IAD is establishing a link, and illuminates
solid when there is a proper connection on the DSL WAN
port and synchronization has been achieved.
VOICE Illuminates when there is activity on the voice ports.
When connected to a Jetstream Voice Gateway, it
remains lit, and blinks when there is activity.
DCE LINK Illuminates when there is a link between the IAD and
data communications equipment (DCE).
DCE ACT Illuminates or blinks when there is activity on the DCE
link.
POWER LAN
LINK
LAN
ACT WAN
LINK VOICE
Status Indicators
NetEngine 7200
Front Panel
DCE
LINK
DCE
ACT
WAN
Modules
RJ-45 or RJ-48C Jack
Telephone Lines
RJ-21X Jack
100-120 / 200-240 V 2.0A MAX. 50/60Hz
Console Line
DB-9
Ethernet
RJ-45 Jack
On/Off
Switch
AC Power
Input
Universal Serial
Interface (DB-25)
AC POWER INPUT 10/100 LAN
SDSL
CONSOLE RS-232 VOICE LINES DCE V.35 / RS-530
T1