Setting sdsl speed for imas dslam—nortel dslam, Figure 4–18. imas first speed option menu, Setting sdsl speed manually – Verilink Net Engine (3150-30626-001) Product Manual User Manual
Page 86: Setting sdsl interface mode, Configuring the sdsl auto cycle speed table
NetEngine IAD User Guide
WAN Configuration
67
Setting SDSL Speed for IMAS DSLAM—Nortel DSLAM
1. Type
7
to set the SDSL first try speed for connecting to an IMAS
(Nortel) DSLAM.
2. The IAD displays the IMAS First Speed Option menu:
Figure 4–18. IMAS First Speed Option Menu
Type the option to select the proper SDSL speed.
3. The IAD saves the configuration and displays the SDSL Configuration
menu.
Setting SDSL Speed Manually
1. Type
8
to set the SDSL speed manually.
2. The IAD displays the following prompt:
Enter SDSL Data Rate (kbps):
Type the rate (144 to 2320 kbps, evenly divisible by 8) and press Enter.
3. The IAD displays the following prompt:
Set Data to FRAMED mode (Nokia)?
Enter Y for framed mode, or any other character if you are connecting
to a DSLAM other than a Nokia DSLAM.
4. The IAD saves the configuration and displays the SDSL Configuration
menu.
Setting SDSL Interface Mode
1. Type
9
to set the SDSL interface mode (bit order).
2. The IAD displays the current setting and a prompt:
SDSL Interface Mode Bit Order is currently
Sign, Magnitude
Enter 1 to "Magnitude, Sign", 2 to
"Sign, Magnitude":
Type
1
to set interface mode to Magnitude, Sign, or type
2
to set
interface mode to Sign, Magnitude.
3. The IAD saves the configuration and displays the SDSL Configuration
menu.
Configuring the SDSL Auto Cycle Speed Table
1. Type
C
to configure any of the 14 SDSL auto cycle speed table entries.
******************************************
IMAS First Speed Option
******************************************
Select First Speed to Try
1. 2320 Kbps
2. 1744 Kbps
3. 1536 Kbps
4. 1152 Kbps
5. 768 Kbps
6. 384 Kbps
7. 192 Kbps