Verilink Net Engine (3150-30626-001) Product Manual - Manual (Page 180)

NetEngine IAD User Guide
Voice Path Configuration 161
Configur-
ing AAL2/
LES CAS
ATM Adaptation Layer 2/Loop Emulation Services (AAL2/LES) is a
broadband local loop emulation service (specifically telephony) that uses
the ATM AAL2 adaptation layer.
When the voice gateway is specified as AAL2/LES CAS (af-vmoa-0145),
type
E on the Main menu to display the AAL2/LES Call Control menu:
Figure 7–21. AAL2/LES CAS Menu
Type the option for the command to execute and proceed to the
appropriate section.
Configuring for AAL2/LES CAS
Type C to display the AAL2/LES Configuration menu:
Figure 7–22. AAL2/LES Configuration Menu
Configuring the IAD for a Specific AAL2/LES Gateway
1. To configure the IAD for a specific gateway, type the option
corresponding with one of the gateways listed in the menu.
2. The IAD configures the voice gateway for the selected gateway and
displays the AAL2/LES Manual Configuration menu. Included in the
*****************************************
AAL2/LES Call Control
*****************************************
C. Configuration
D. Debugging
S. Statistics
************************************
AAL2/LES Configuration
************************************
AAL2/LES is MANUALLY configured.
Port Control (bit mapping) is 0x00000000
CAS signaling is GR303-ABCD.
CAS refreshing is DISABLED.
Idle CAS refreshing is DISABLED.
Max. CPS-SDU size is 0 octets.
"Combined use" timer is 0 millisecond(s).
User state control (USC) is DISABLED.
Dialled digit (outband) is DISABLED.
C. -MANUAL- Configuration
A. Accelerated Networks
L. Lucent
G. General Bandwidth
M. MetaSwitch
Z. Zhone
T. TdSoft